GIGABYTE A520M K V2

CPU
-AMD Socket AM4, support for: AMD Ryzen™ 5000 G-Series Processors/ AMD Ryzen™ 5000 Series Processors/ AMD Ryzen™ 4000 G-Series Processors/ AMD Ryzen™ 3000 and Ryzen™ 3000 G-Series Processors
Chipset
-AMD A520
Memory
-2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system memory
-Support for DDR4 5100(O.C.) / 4800(O.C.) / 4600(O.C.) / 4400(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3733(O.C.) / 3600(O.C.) / 3466(O.C) / 3400(O.C.) / 3200 / 2933 / 2667 / 2400 / 2133 MHz memory modules
-Dual channel memory architecture
-Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
-Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
-Support for Extreme Memory Profile (XMP) memory modules
Onboard Graphics
Integrated Graphics Processor:
-1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
-1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz
* Support for HDMI 2.1 version, HDCP 2.3, and HDR.
Maximum shared memory of 16 GB
Audio
-Realtek® Audio CODEC
-High Definition Audio
-2/4/5.1/7.1-channel
* You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.
LAN
-Realtek® GbE LAN chip (1 Gbps/100 Mbps)
Storage Interface
CPU:
- 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 3.0 x4/x2 SSD support)
Chipset:
-4 x SATA 6Gb/s connectors
Support for RAID 0, RAID 1, and RAID 10
USB
CPU:
-4 x USB 3.2 Gen 1 ports on the back panel
Chipset:
-2 x USB 3.2 Gen 1 ports available through the internal USB header
-6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
Internal I/O Connectors
-1 x 24-pin ATX main power connector
-1 x 8-pin ATX 12V power connector
-1 x CPU fan header
-1 x system fan header
-1 x M.2 Socket 3 connector
-4 x SATA 6Gb/s connectors
-1 x front panel header
-1 x front panel audio header
-1 x USB 3.2 Gen 1 header
-2 x USB 2.0/1.1 headers
-1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S module only)
-1 x speaker header
-1 x Clear CMOS jumper
-1 x chassis intrusion header
Back Panel Connectors
-1 x PS/2 keyboard/mouse port
-1 x D-Sub port
-1 x HDMI port
-4 x USB 3.2 Gen 1 ports
-2 x USB 2.0/1.1 ports
-1 x RJ-45 port
-3 x audio jacks
I/O Controller
-iTE® I/O Controller Chip
H/W Monitoring
-Voltage detection
-Temperature detection
-Fan speed detection
-Fan fail warning
-Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install.